Stepin Adventure
Stepin Adventure
Kothrud, Pune, Maharashtra
GST No. 27AYRPS5177M1ZA
TrustSEAL Verified
Call 08046029140 91% Response Rate
SEND EMAIL

Ice Screws,multidirectional hangers,climbing ancho

Ice screws, multi-directional hangers, glues for climbing anchors, anchor plates - from the highest summits to the deepest caves,our certified anchors are a guarantee of quality for outfitters and practitioners.

Gipfel Dynamo Rock Hanger M10

Gipfel Dynamo Rock Hanger M10
  • Gipfel Dynamo Rock Hanger M10
Get Best Quote
Approx. Price: Rs 210 / PieceGet Latest Price
Product Brochure

Product Details:

ColorSS
Usage/ApplicationRock Climbing
Breaking Strength25KN
Weight45 gm
BrandGipfel
StandardAISI
Steel GradeSS304

Weight for Dynamo Rock Hanger M10
Stainless Steel 304 Rock hangers for outdoor use (not marine grade).– Bore diameter: 12mm– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Badami Anchor Pack

Gipfel Badami Anchor Pack
  • Gipfel Badami Anchor Pack
Get Best Quote
Approx. Price: Rs 1,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ColorSilver
Breaking Strength32kN
Usage/ApplicationRock Anchors
BrandGipfel
Material GradeSS 304
Weight64 gm
PlatingZinc plated

This pack has been put together keeping Badami climbing season in India in mind. The pack includes the following equipment

  • 5 pcs. M10 Dynamo Rock Hanger (Material grade: SS 304)
  • 5 pcs. M10 Nuts only (Material grade: SS 304)
  • 1 pc. Badami Nut Tool
  • Hangers have EN959 and CE 3076 certification
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Badami Nut Tool

Gipfel Badami Nut Tool
  • Gipfel Badami Nut Tool
  • Gipfel Badami Nut Tool
  • Gipfel Badami Nut Tool
Get Best Quote
Approx. Price: Rs 1,030 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Breaking Strength20 kN
MaterialSS
BrandGipfel
Weight64g
Country of OriginMade in India
Packaging TypeBox
Thickness4 mm

A versatile nut tool designed for Trad, mixed- Sport and Big Wall climbing. Tightens nuts and maillons, wriggles out those obstinate nuts, and the hooked nose grabs onto cam bars in the deepest cracks. The screwdriver end helps undo those stubborn knots, works as a pry tool, and finding an additional new use for this multi-tool is not a challenge.

Specifications:

  • Built-in wrenches of sizes 13, 17 & 19 mm, which work with 10, 12 mm & 3/8 inch Rawl bolts, open wrench sizes 14 & 17mm
  • Philips head screwdriver
  • Centimeter markings along the side
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Dynamo Expansion Bolt M12X95MM SS304

Gipfel Dynamo Expansion Bolt M12X95MM SS304
  • Gipfel Dynamo Expansion Bolt M12X95MM SS304
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialStainless Steel
BrandGipfel
ColorSilver
Breaking Strength20 KN
Diameter12 mm
Placement Length87mm
Length of the Bore95mm

Stainless Steel 316 wedge type expansion bolts for outdoor use (marine grade):

  • Choose the bolt size carefully depending upon the strength of base rock material. If the rock is soft or has an uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
  • This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 km of coastline, we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
  • If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

M12 SS304 Gipfel Dynamo Rock Hanger

M12 SS304 Gipfel Dynamo Rock Hanger
  • M12 SS304 Gipfel Dynamo Rock Hanger
  • M12 SS304 Gipfel Dynamo Rock Hanger
Get Best Quote
Approx. Price: Rs 210 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ColorSS
Usage/ApplicationOutdoor
Breaking Strength25kN
Weight65 gm
BrandGipfel
Material GradeSS304
Bore Diameter12 mm

Product Details:
  • This hanger features chamfered edges of the eye hole to minimize wear on the carabiner. The eye hole itself is large enough to accommodate two carabiners.
  • Choose the bolt size carefully depending upon the strength of base rock material. If the rock is soft or has an uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
  • This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 km of coastline, we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
  • If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
  • Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Dynamo Expansion Bolt M10X70MM

Gipfel Dynamo Expansion Bolt M10X70MM
  • Gipfel Dynamo Expansion Bolt M10X70MM
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

MaterialStainless Steel
BrandGipfel
SizeM10
ColorSteel
Thickness10 mm
Country of OriginMade in India
Steel GradeSS304
Breaking Strength22 kN

Product Details:
  • Choose the bolt size carefully depending upon the strength of base rock material. If the rock is soft or has an uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
  • This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 km of coastline, we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
  • If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.

The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

  • M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
  • M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
  • EN959:2007, CE3076
  • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take the factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
  • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
  • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: single piece
Yes! I am Interested

Gipfel Polar Ice Screw Ice Climbing

Gipfel Polar Ice Screw Ice Climbing
  • Gipfel Polar Ice Screw Ice Climbing
  • Gipfel Polar Ice Screw Ice Climbing
Get Best Quote
Approx. Price: Rs 3,400 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Usage/ApplicationMountaineering
Weight1.30 Kg
BrandGipfel
MaterialSS
Steel GradeSS304
Surface FinishPolished
Product Length17 cm

An alpinist’s best friend, Polar ice screw features an integrated crank and concave cut teeth for ease of placement in ice. The tube features a tapered profile for a smooth passage of the screw in ice. Polar ice screw is made from heat treated and hardened Chromoly alloy to achieve the desired mechanical properties.

Technical Features:
  • Axial Pullout Strength: 5kNRadial Pullout Strength in test Ice block Type 2: 15kN Vertical traverse per rotation (after 10 full rotations) under the load of 120N is > pitch of the thread

Materials:
  • Tube: Chromoly Steel
  • Hanger: Chromoly Steel

Certifications:
  • EN 568:2007, CE1019 and UIAA 151 NOTE: Strength of an ice screw depends significantly on the quality of ice. Avoid using this on fragile, aerated and thin slabs of ice. A screw is only one part of the safety chain and should be used in conjunction with only CE and UIAA certified equipment.

Price Details: 
  • 21CM :3400 
  • 19CM :3000
  • 17CM :2600
Request
Callback


Additional Information:

  • Item Code: ISC21
  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Mountain Gear Polar Ice Screw

Gipfel Mountain Gear Polar Ice Screw
  • Gipfel Mountain Gear Polar Ice Screw
  • Gipfel Mountain Gear Polar Ice Screw
Get Best Quote
Approx. Price: Rs 3,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Usage/ApplicationMountaineering
Weight1.1 kg
BrandGipfel
Screw Length19 cm
Surface FinishedPolished
Thread Length12 cm
MaterialSS

An alpinist’s best friend, Polar ice screw features an integrated crank and concave cut teeth for ease of placement in ice. The tube features a tapered profile for a smooth passage of the screw in ice. Polar ice screw is made from heat treated and hardened Chromoly alloy to achieve the desired mechanical properties.
Request
Callback


Additional Information:

  • Item Code: ISC19
  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Dynamo Expansion Bolt M12X95MM SS316

Gipfel Dynamo Expansion Bolt M12X95MM SS316
  • Gipfel Dynamo Expansion Bolt M12X95MM SS316
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialStainless Steel
BrandGipfel
GradeSS316
Diameter12mm
Placement Length87 mm
Recommended Length95 mm

Stainless Steel 316 wedge type expansion bolts for outdoor use (marine grade):

  • Choose the bolt size carefully depending upon the strength of base rock material. If the rock is soft or has an uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
  • This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 km of coastline, we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
  • If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.


The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere:

  • M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
  • M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa) EN959:2007, CE3076
  • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take the factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
  • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
  • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Dynamo Expansion Bolt M10X100MM

Gipfel Dynamo Expansion Bolt M10X100MM
  • Gipfel Dynamo Expansion Bolt M10X100MM
Get Best Quote
Approx. Price: Rs 190 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
SizeM12
MaterialSS
BrandGipfel
Weight65g
Lenght90mm
Steel GradeSS316
Diameter10 mm
Recommended Length of a Bore in Rock100 mm

Stainless Steel 304 wedge type expansion bolts for outdoor use:

  • Choose the bolt size carefully depending upon the strength of base rock material. If the rock is soft or has an uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
  •  Recommended for medium to hard rock in non-coastal areas.  Please refer to Access Fund recommendations on bolt type for specific types of rock.
  • If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.
  • The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
  • M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa) M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa) – EN959:2007, CE3076
  • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take the factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
  • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
  • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested

Gipfel Double Ring Anchor

Gipfel Double Ring Anchor
  • Gipfel Double Ring Anchor
  • Gipfel Double Ring Anchor
Get Best Quote
Approx. Price: Rs 550 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialBrass
Usage/ApplicationRock Climbing
Model Name/NumberM12
BrandGipfel
Breaking Strength30 kN
Steel GradeSS304
Anchor TypeRing Anchor

Product Details:
  • Double rings anchors available in SS 316 (for M12 bolts) and SS 304 (for M10 bolts) grades
  • Our regular Dynamo rock anchor conforms to EN 959:2016 and CE 3076
  • MBS (rings): 30 kN
  • SIZE AND GRADE: M12 (SS 316 marine grade), M10 (SS 304)

Price Details:
  • M10 : Rs. 500
  • M12 : Rs. 550
Request
Callback


Additional Information:

  • Delivery Time: Same day dispatch for orders before 4pm
  • Packaging Details: Carton Box
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Product

View All Product


Reach Us
Shripad Sapkal (Proprietor)
Stepin Adventure
3, Anand Complex, Alkapuri Society, Opposite Hotel Kinara, Paud Road, Vanaz Corner
Kothrud, Pune - 411029, Maharashtra, India


Call Us


Send E-mailSend SMS